What are the common materials of bearing sealing devices

在滚动轴承两端面，都会安装有相应的密封装置。带防尘盖与带密封圈，两个性能不同，一个是防尘，一个是密封。那么这个密封装置常见的材料有哪些呢？主要有以下几种。

Bearing installation and disassembly tips: ensure better performance

Introduction: The correct installation and removal of bearings is essential to ensure their performance and extend their service life. Improper installation or disassembly methods may not only damage the bearing, but also affect the performance of the entire mechanical system. This article covers some basic installation and removal techniques. ​

Bearing temperature impact: How to deal with it introduction

轴承在运行过程中的温度控制对于其性能和寿命非常重要。过高或过低的温度都可能对轴承造成损害，影响其正常工作。本文将探讨温度对轴承性能的影响以及如何在极端温度条件下维护轴承。

Bearing material selection: Key factors and common materials

Choosing the right material is crucial to the performance and life of the bearing. Different application environments and working conditions require different physical and chemical characteristics of bearings. This article will explore the key factors affecting material selection and common bearing materials. ​

Exploring the bearing temperature rise phenomenon after injection of grease: causes and countermeasures

The proper injection of grease is essential for the temperature control of bearings, and the influencing mechanism behind it involves a variety of variables, including the amount, type, distribution and working environment of grease. Proper application of grease can significantly reduce friction and wear during bearing operation and maintain a stable temperature, but if applied improperly, it can backfire, raise temperatures and damage bearing health. The following is a depth analysis of how gre

Installation and disassembly skills of rolling bearings

    The clearance of a rolling bearing refers to the maximum activity of the other ring along the radial or axial direction when a ring is fixed, which is divided into two types: radial clearance and axial clearance. When assembling rolling bearings, the clearance should not be too large or too small. Excessive clearance reduces the number of rolling elements that bear the load at the same time, increases the load of a single rolling element, thereby reducing the rotation accuracy of the bearing